How to Apply Mauget Micro-Injections
Complete step-by-step guide for applying Mauget micro-injection treatments. Learn the simplest and most effective micro-injection system ever developed for trees.
Quick Application Steps
Mauget is "The Right Way To Treat A Tree." Follow these simple and easy instructions:
1. Measure the tree at breast height (DBH) in inches (diameter) 2. Divide that number by 2 (if measuring circumference, divide by 6), that will establish the number of capsules to use on the tree 3. Drill 11/64″ holes approximately 6″ apart at the base (root buttress) of the tree, avoiding root valleys 4. Compress capsules by hand or use the Mauget compression tool 5. Insert the feeder tube onto the capsule (gunsight upward) 6. Place capsule and feeder tube into holes drilled into the tree 7. Tap the compressed capsule and feeder tube on the rear of capsule seating the feeder tube into the tree while puncturing the capsules membrane/feeder tube interface 8. Remove capsule and feeder tube from the tree when empty 9. Dispose of the emptied capsules as outlined in safety guidelines
Capsule sizing guide based on tree diameter
Training Videos
Watch our installation videos available in both English and Spanish to ensure proper application technique:
**English Version:** https://www.youtube.com/watch?v=AtgWNWap0yo **Ver en Español:** https://www.youtube.com/watch?v=vt4XsTF33w0
Click to watch: How to Apply Mauget Micro-Injections (English)
Click to watch: Cómo aplicar Micro-Inyecciones Mauget (Español)
Table of Contents
Key Points
Only requires a portable drill - no expensive equipment needed
Measure tree diameter to determine correct number of capsules
Drill holes 6 inches apart at tree base, avoiding root valleys
Compress capsules before inserting feeder tube
System provides targeted, systemic treatment
Always remove empty capsules promptly after treatment
Need Additional Support?
Our technical team is here to help you succeed with Mauget solutions.